24 小时客户热线 +86 15395181370
产品详情
The Video Of The 508 RWr Series Deburring Machine
- In the first station – Grinding Belt(R station) of the finishing machine,burrs and imperfections are removed with a grinding belt, resulting in a flat, burr-free surface.
- After grinding,the Multibrush(W station), wich ensures your product is perfectly finished. The six brushes provide a non-directional finish and round the edges with a radius of 2+ mm, giving the product a high-quality and durable appearance.
- The 3rd station Roller Brush (for r station), The roller brush inside the 去毛刺机 contacts the surface of the workpiece through the high-speed rolling bristles, and uses the elasticity and friction of the bristles to remove burrs and uneven areas on the workpiece surface.508 RWr Deburring Machine offers the possibility for full ERP control and seamless integration into automated production processes.
Wide belt & Rotary brush & Roller Brush
Metal finishing machine for brushing and polishing
Deburring & Polishing
No.3, No.4 Finishing
Hairline Finishing
去毛刺机 基本参数
Available width：
300/450/630/800/1000/1300/1500/1600 mm
Available thickness：
0.5-100 毫米
Feeding speed：
0.5-8 米/分钟
Rotation speed of rotary brush：
9-21 r/s
Rotary brush size：
300*300 / 300*400 毫米
Edge rounding range：
R 0.1-1.0 毫米
Worktable：
900 – 980 mm
Minimum processing size：
30*30 毫米（磁性）
50*50 毫米（真空）
Finished product after deburring
508 RWr Deburring Machine FAQ
去毛刺、边缘倒圆角和表面抛光能否由一台机器或一道工序完成？
Yes, deburring(wide grinding belt), edge rounding(rotary brush), and surface finishing(roller brush) can all be done by a single machine, the ADV® 508RWr. This 3-stage machine is single-sided and can even process sheet metal parts as small as 0.5 x 0.5mm. The 3 stages are comprised of a grinding belt for deburring, rotary brushes for edge rounding and a fleece belt for surface finishing.
What materials are suitable for ADV® 508RWr 钣金去毛刺机?
The ADV® 508RWr can process a wide array of metal alloys.These alloys include steel,aluminum,brass,copper,titanium,stainlesssteel and even specialty alloys.
为什么必须去除金属零件上的激光氧化物？
使用氧气驱动的激光进行切割时，切割边缘会产生激光氧化物。这种沿部件侧面产生的激光氧化物会妨碍油漆涂层的粘附，并增加焊接的难度。因此，去除切割边缘的激光氧化物将大大改善喷漆和焊接等下游工艺。
Why does the automatic metal deburring machine use a roatary brush to round the edges of metal sheets?
Thanks to the rotary brushes of the ADV® 508RWr, uniform edge rounding for sheet metal can be achieved in a single pass. These rotary brushes can achieve an edge rounding result of up to 2 mm along all edges for a wide variety of metal alloys.
更多产品
508 M300 手动去毛刺机对于特殊产品或小批量生产是必要的。制造商可以跳过自动设备有时冗长的编程过程。对于半自动设备来说过于脆弱的零件，手动去毛刺也是确保光滑表面的更好方法。
精加工的目的是提高金属板材部件的质量和视觉吸引力，同时也有助于保护它们。光饰的目的是提高金属板材零件的质量和视觉效果，同时还能起到保护作用。光饰可确保光洁度均匀一致，并有助于提高涂层、油漆或其他材料在表面上的附着力。
使用 ADV 先进的精加工设备，您可以对金属板材零件进行各种精加工。通过使用合适的砂带和适当的速度，可以按照您的喜好对金属板材零件进行精加工，例如线性精加工或非定向精加工。
