24h customer hotline +86 15395181370
ADV® 508-RY
Details zum Produkt
Wide Sanding belt & Disc brush Entgratungsmaschine
Wide grinding belt: deburring large areas at one time for metal parts surface
Deburring disc brush: remove minor burrs and edge rounding
Die ADV® RY is not only compact, but also has an integrated Dry/Wet dust extraction system that ensures a clean working environment. With various processing stations and tools, it offers you unique processing flexibility. Whether you want to deburr or round parts or apply a surface finish, this deburring machine can do it all!
The Video of the RY deburring machine :
- Find out more about our compact deburring machine for small sheet metal parts in our video. Highly flexible and easy to operate, the ADV® RY enables cost-effective single-sided deburring, edge rounding and surface finishing for sheet metal parts in just a single pass.
- In the first station(Grinding Belt R station) of the finishing machine, burrs and imperfections are removed with a grinding belt, resulting in a flat, burr-free surface.
- After grinding, four oscillating disc brushes(Y station) follow that exert light pressure on the product, ensuring a rounding on both inner and outer contours.
Features of RY Series Equipment :
- Deburring , Descaling, Edges Rounding and Brushing in one feed
- Ideal for low-cost finishing and deburring
- Schneller Austausch von Verbrauchsmaterialien
- Vertical burrs removed from stamped,punched,laser,plasma,and water-jet cut parts
- Customizable models upon different requests
Basic Prameters:
Effektive Verarbeitungsbreite:
300/630/800/1000/1300/1600mm(11.8″/24.8″/31.5/39.4/51.2/63”)
Effektive Verarbeitungsstärke:0.5-120mm(0.02-4.7″)
Fördergeschwindigkeit:0,5-7m/min
Mindestgröße des Werkstücks:
5050 mm (Vacuum)
3030 mm (magnetisch)
Disc brush quantity:
3/5/7/11/13/15
Disc brush size:
1604025mm(6.31.60.98″)
FINISHED :
508RY Frequently Asked Questions
What materials can be processed using this equipment, and how does the magnetic suction system work?
508RY is specifically designed for processing carbon steel and other ferromagnetic metal sheets. The full magnetic suction worktable utilizes strong permanent magnets to securely hold metal sheets in place without the need for additional fixtures or tooling. It allows for stable processing of workpieces with dimensions as small as 120mm × 120mm, ensuring efficient and precise handling throughout the deburring, polishing, and descaling processes.
Deburring with a wide belt
The grinding belt was specially developed for the flexible and cost-effective deburring of punched and laser parts.
Can auto deburring machine provide consistent processing quality for different shapes and sizes of workpieces?
Yes, our deburring machine features a combination of processing stations, including a disc brush station and an abrasive belt station, which can work independently or together. The disc brush station is designed for removing slag and burrs from the edges of workpieces, while the abrasive belt station handles surface treatments like polishing, wire drawing, and deburring. With the use of special soft abrasive brushes, it ensures consistent high-quality processing without damaging the surface of the sheet metal, even if it has a protective film.
How to deburr and edge round small sheet metal parts?
Small sheet metal parts can be deburred and edge rounded with the ADV@ RY. This 2-stage machine allowsfor deburring, edge rounding.
What is single-sided deburring, and how does it differ from other deburring methods?
Single-sided deburring refers to a deburring process where only one side of the metal is treated to remove burrs orsharp edges. This means that the deburring operation focuses exclusively on one surface or edge of the material, leavingthe opposite side unaffected.
How to ensure safety and prevent damage during operation of the auto deburring machine?
The deburring equipment is equipped with several safety features to ensure safe and stable operation. These include:
1.Safety limit plates at the entry and exit points to prevent workpiece stacking.
2.Automatic power-off function when the equipment door is opened.
3.Emergency stop switches located at both the front and rear of the machine.
4.Pneumatic braking for the abrasive belt station to enable quick emergency stops.
5.Anti-deviation controls on the conveyor belt and abrasive belts to prevent misalignment and damage.
Weitere Produkte
508 M300 Das manuelle Entgraten ist für Spezialprodukte oder Kleinserien erforderlich. Hersteller können den manchmal langwierigen Programmierprozess einer automatischen Maschine überspringen. Es ist auch ein besserer Weg, um eine glatte Oberfläche auf einem Teil zu gewährleisten, das zu empfindlich für halbautomatische Anlagen ist.
3 blet grinidng machine to deburr after laser cutting Der Zweck der Endbearbeitung ist es, die Qualität und den optischen Reiz der Blechteile zu verbessern und gleichzeitig zu ihrem Schutz beizutragen. Sie sorgt für eine gleichmäßige Oberfläche und kann dazu beitragen, die Haftung von Beschichtungen, Farben oder anderen Materialien auf der Oberfläche zu verbessern.
2-Band-Schleifmaschine zum Entgraten nach dem Laserschneiden Mit den fortschrittlichen Endbearbeitungsmaschinen von ADV können Sie Ihre Blechteile mit verschiedenen Oberflächenbehandlungen versehen. Durch die Verwendung der richtigen Schleifbänder in Kombination mit der geeigneten Geschwindigkeit können Sie Ihre Blechteile nach Ihren Wünschen bearbeiten, z. B. mit einem linearen Finish oder einem ungerichteten Finish.
Rr Metallveredelungsmaschine zum Bürsten und Polieren.Die Veredelung von Blechteilen bezieht sich auf den Prozess des Abrundens und Verfeinerns der Oberflächen von Blechteilen, um ihnen ein glattes, ästhetisch ansprechendes Aussehen zu verleihen. Entfernen von Unvollkommenheiten, Graten, rauen Kanten und anderen unerwünschten Merkmalen von der Oberfläche.