Metal Deburring Machine – Wide belt & Wide belt(2 blet grinidng machine to deburr after laser cutting)

1. For deburring, sanding, and finishing of flat metal sheets (aluminum, copper, stainless steel, etc.).

2. For removing longitudinal burrs from laser-cut, stamping, and water jet-cut workpieces.

3. Standard available widths are 300mm, 630mm, 800mm, 1000mm, 1300mm, 1600mm or customized.

4. The metal finishing machine can be used for wet or dry processes.

• The ADV® RR Deburring Machine with 2 sets of sanding belt(1# sanding belt removes heavy slag, oxidized skin, large flanging and other burrs on the surface of the workpiece.2# sanding belt brushes and finish the surface of the workpiece.)
• The ADV 508 RR removes slag particles, heavy flanges and other large burrs on the surface of the workpiece by two sets of wide wide belt mechanisms, and passes through the type of processing without destroying the dimensional accuracy of the workpiece.
• This equipment adopts high temperature resistant conveyor belt to transfer the workpiece, frequency conversion speed regulation.

Before and after Deburring & Finishing ：

• Die ADV® RR deburring machine optimally prepares your punched parts or laser cut parts for further processing. All burrs are removed, if desired, you can also apply a special surface finish.
• 508-RR Finishing Machine is an economical metal sanding finishing machine that can handle scratch repair and descaling of various metal sheets to obtain good surface consistency, replacing inefficient manual grinding.
• Wet dust collectors or water filtration systems are available at request

See for yourself: the Video of the ADV® RR Wet or Dry Metal Deburring Machine!

Frequently Asked Questions

Warum ist es wichtig, Laseroxid von Metallteilen zu entfernen?

• Beim Schneiden mit einem sauerstoffbetriebenen Laser entsteht entlang der Schnittkante Laseroxid. Dieses Laseroxid an der Seite der Teile verhindert, dass Lackschichten haften, und erschwert das Schweißen erheblich. Die Entfernung des Laseroxids an den Schneidkanten verbessert daher die nachgelagerten Prozesse wie Lackieren und Schweißen erheblich.

Can deburring,oxide removal and surface finishing be done by a single machine orprocess?

• Yes,deburring,oxide removal,and surface finishing can all be done by a single machine.508 RR has two groups of dry abrasive belt with 2-stage machine is single-sided and can evenprocess sheet metalparts as small as 0.3×0.3mm.This is a professional deburring machine, whether you have thin or thick workpieces

What materials are suitable for 508 RR metal automatic deburring?

• The RR Entgratungsanlage can process a wide array of metal alloys.These alloys include steel,aluminum,brass,copper,titanium,stainlesssteel and even specialty alloys.