24 小时客户热线 +86 15395181370
产品详情
508-HR (Hammerhead & Wide sanding belt) 去毛刺机
Hammerhead: The cleaning hammer rotates at high speed, knocks on the workpiece surface, cleans the workpiece surface and surrounding contours, and removes slag from the edge of the metal plate
Wide belt: Deburring and rust removal of large areas of metal parts surfaces
- 508 HR Series – The manual removal of slag is time-consuming and burdensome for both the operator and the machines, leading to high costs and wear. The HR, specifically developed by ADV, automatically remove slag after plasma or oxy-fuel cutting. These machines can be easily integrated into any production line, removing slag before the product reaches the deburring machine for edge rounding.
- The removed waste material is collected in a bin and can be disposed of as scrap. By performing slag removal separately, contamination in the deburring machine is prevented.
- Both models are ergonomically designed with a touchscreen control for ease of use. The slag is effectively removed by two counter-rotating slag breaker rollers, which strike the product twice per revolution. The result is a flat product ready for further finishing.
Effective processing width:
300/630/800/1000/1300/1600mm(11.8″/24.8″/31.5″/39.4″/51.2″/63″)Effective processing thickness:
0.5-100mm(0.02-3.9″)conveying speed:
0.5-7m/minMinimum workpiece size:
5050 mm(Vacuum)3030 毫米（磁性）
Hammer set service life:
6-12 monthsslag removal height:
5mm(0.2”)
The video of the 508 HR Deburring Machine:
ergonomically designed with a touchscreen control for ease of use. The slag is effectively removed by two counter-rotating slag breaker rollers, which strike the product twice per revolution. The result is a flat product ready for further finishing.
