24h customer hotline +86 15395181370
제품 세부 정보
Round tube polishing – Quality and productivity: straight tube(Long or Short), multi-station wet or dry finishing
Max 5- 100mm
Straight tubes
Optional 1 up to 10 stations
The ADV 108-6 round tube, multi-station wet finishing machine, available with 1 stations (ADV 108-1 TUBE POLISHER) and 6 stations (ADV 108-6 TUBE POLISHER), is equipped with the ADV planetary system and enables a faster finishing job than single–station machines.
Automatic work set-up and control of all the information about the tube finishing are done in a mobile panel with an integrated touchscreen. Completely independent finishing stations. Final finish in only one go.
The wet-operation system enables faster cooling of the tube as well as the possibility of working different types of metal simultaneously.
Machine parameters:
| 아니요 | 항목 | 사양 |
| 1 | 모델 | ADV 108-6 |
| 2 | Available diameter | 5-100 mm |
| 3 | 총 모터 출력 | 26 kw |
| 4 | 연마 벨트 모터 파워 | 2.2 kw*6 |
| 5 | Speed of abrasive belt | 7.8-18 m/s |
| 6 | Rotary brush motor power | 1.5 kw*6 |
| 7 | Feeding system motor power | 0.37 kw*7 |
| 8 | Speed of feeding | 0.7-4 m/min |
| 9 | Size of abrasive belt | 940*50 mm |
The video of the 108-6 tube polishing machine
- To reduce temperature and prevent dust in the grinding area, a closed-circuit water-cooling system is employed. Water is sprayed onto the finishing area, filtered, and then pumped back into the machine. Also you can select dry tube polishing by your needs.
- With the 108 Planetary System the tube is not spinning. The abrasive belts rotate around the tube while it is safely transported by the feeding systems.
- The 108-6 is designed to work under intensive conditions, even multiple shifts a day, consistently delivering a multi-grain finish tube after tube.
- It is possible to equip the 108-N with tables for easier tube loading, unloading and storage.
Tube Finished – work platform 1 :
Tube Finished – work platform 2 :
더 많은 제품
106 튜브 파이프 연마기는 다양한 요구 사항에 따라 1~10 세트의 연삭 헤드를 장착할 수 있으며 유성 시스템을 갖추고 있으며 단일 스테이션 기계보다 빠른 마감 작업을 가능하게 합니다.
106-N - 연마 벨트 또는 격자가 다른 연마 휠을 사용하여 파이프의 표면 거칠기를 줄일 수 있습니다. 동시에 다양한 연마 휠을 장착하여 거울, 브러시 및 기타 표면 마감을 얻을 수 있습니다.